Polyurethanes

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1040 is an effective dispersing additive for all solvent-based resins. Especially it is recommended for high gloss automotive primer and top coats, coil coatings, PU refinishes and etc.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

NAC-DS-1065 S is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings. NAC-DS-1065S reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1065).

NAC-DS-1065 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings.

NAC-DF-2027 is very effective and strong air release, de-foaming and leveling additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors and doesn’t interfere in adhesion between layers.

NAC-DF-2030 is very effective and strong air release and de-foaming additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors. It has no odor and volatile solvents and doesn’t interfere in adhesion between layers.

NAC-L-3077 is an effective solvent-based leveling additive for all kinds of resins, especially for epoxy floor and flow coatings.

Thermoplastic acrylics

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1040 is an effective dispersing additive for all solvent-based resins. Especially it is recommended for high gloss automotive primer and top coats, coil coatings, PU refinishes and etc.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

Epoxies

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1065 S is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings. NAC-DS-1065S reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1065).

NAC-DS-1065 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

NAC-DF-2027 is very effective and strong air release, de-foaming and leveling additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors and doesn’t interfere in adhesion between layers.

NAC-DF-2030 is very effective and strong air release and de-foaming additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors. It has no odor and volatile solvents and doesn’t interfere in adhesion between layers.

NAC-DF-2020 is very special de-foaming, air release and leveling additive for epoxy clear coats. NAC-DF-2020 creates clear epoxy films with no haze.

NAC-L-3077 is an effective solvent-based leveling additive for all kinds of resins, especially for epoxy floor and flow coatings.

Melamine baking systems

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1040 is an effective dispersing additive for all solvent-based resins. Especially it is recommended for high gloss automotive primer and top coats, coil coatings, PU refinishes and etc.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

Solvent-based

 primers

NAC-DS-1040 is an effective dispersing additive for all solvent-based resins. Especially it is recommended for high gloss automotive primer and top coats, coil coatings, PU refinishes and etc.

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1070 is very effective dispersing additive for use in solvent-based coil coatings based on saturated polyesters. It Prevent re-agglomeration of pigments and prepare very long stabilization and storage time.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

Topcoats

NAC-DS-1040 is an effective dispersing additive for all solvent-based resins. Especially it is recommended for high gloss automotive primer and top coats, coil coatings, PU refinishes and etc.

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

Solvent-free epoxies and PU

NAC-DS-1065 S is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings. NAC-DS-1065S reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1065).

NAC-DS-1065 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings.

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

NAC-DF-2027 is very effective and strong air release, de-foaming and leveling additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors and doesn’t interfere in adhesion between layers.

NAC-DF-2030 is very effective and strong air release and de-foaming additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors. It has no odor and volatile solvents and doesn’t interfere in adhesion between layers.

NAC-DF-2020 is very special de-foaming, air release and leveling additive for epoxy clear coats. NAC-DF-2020 creates clear epoxy films with no haze.

NAC-L-3077 is an effective solvent-based leveling additive for all kinds of resins, especially for epoxy floor and flow coatings.

Solvent-based epoxies and PU

NAC-DS-1065 S is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings. NAC-DS-1065S reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1065).

NAC-DS-1065 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments. It is especially recommended for epoxy and PU coatings

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

NAC-DF-2027 is very effective and strong air release, de-foaming and leveling additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors and doesn’t interfere in adhesion between layers.

NAC-DF-2030 is very effective and strong air release and de-foaming additive for solvent based flow and floor coatings, especially recommended for epoxy and PU flow and floors. It has no odor and volatile solvents and doesn’t interfere in adhesion between layers.

NAC-DF-2020 is very special de-foaming, air release and leveling additive for epoxy clear coats. NAC-DF-2020 creates clear epoxy films with no haze.

NAC-L-3077 is an effective solvent-based leveling additive for all kinds of resins, especially for epoxy floor and flow coatings.

 

Solvent-Based

Alkyds

NAC-DS-1014 is very cost effective and low dosage dispersing agent, prevents re-agglomeration of pigments and fillers in storage time.

NAC-DS-1013 is a special low dosage dispersing agent for use in construction coatings.

NAC-DS-1022 is a dispersing agent that increases the viscosity to some extent and prevents sagging.

NAC-DS-1022 S is an anti-floating/flooding version of NACO-DS-1022.

NAC-DS-1060 is a general dispersion additive used for all resin types. Prevent re-agglomeration of pigments and yellowing in final coatings.

NAC-DS-1060 S is a general dispersing additive compatible with all resins. It reduces flooding/floating and separation of organic pigments in combination with TiO₂ (is an anti-floating/flooding version of NAC-DS-1060).

NAC-DS-1046 is very effective and low dosage dispersing agent with strong reduction in mill-base viscosity for all kind of resins in industrial solvent-based coatings. High gloss coatings are obtained with this additive.

Water-Based

Acrylics

NAC-DS-1211 is a cost effective dispersing agent for water-based construction coatings. NAC-DS-1211 increases the viscosity to some extent and decreases your thickener dosage in formulation.

NAC-DS-1080 is a universal dispersing agent for stabilizing all kind of pigments specially TiO₂ in water-based and solvent-based high gloss coatings.

Primer surfacers

Solvent-based:

DELTA-FC 1022 is commonly used defoamers in OEM primer surfacers. Both function during processing steps and application.

DELTA-SC 2772 and DELTA-SC 2777 are recommended for primer surfacers. Both are fluorocarbon- modified polyacrylates which not only give good levelling, but also improve substrate wetting substantially.

DELTA-DC 4010 M and DELTA-DC 4065 are widely used dispersion control additives.

DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Water-based:

DELTA-FC 1525 is suited for use in water-based primer surfacers.

DELTA-SC 2772 (must be neutralized before addition) is recommended for water-based primer surfacers. Also the short chain polysiloxane-based DELTA-SC 2580 is commonly used.

DELTA-DC 3590 (pH-independent) is specifically recommended. It has good water-resistance properties. DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Primer surfacers

Solvent-based:

DELTA-FC 1022 is commonly used defoamers in OEM primer surfacers. Both function during processing steps and application.

DELTA-SC 2772 and DELTA-SC 2777 are recommended for primer surfacers. Both are fluorocarbon- modified polyacrylates which not only give good levelling, but also improve substrate wetting substantially.

DELTA-DC 4010 M and DELTA-DC 4065 are widely used dispersion control additives.

DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Water-based:

DELTA-FC 1525 is suited for use in water-based primer surfacers.

DELTA-SC 2772 (must be neutralized before addition) is recommended for water-based primer surfacers. Also the short chain polysiloxane-based DELTA-SC 2580 is commonly used.

DELTA-DC 3590 (pH-independent) is specifically recommended. It has good water-resistance properties. DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Primer surfacers

Solvent-based:

DELTA-FC 1022 is commonly used defoamers in OEM primer surfacers. Both function during processing steps and application.

DELTA-SC 2772 and DELTA-SC 2777 are recommended for primer surfacers. Both are fluorocarbon- modified polyacrylates which not only give good levelling, but also improve substrate wetting substantially.

DELTA-DC 4010 M and DELTA-DC 4065 are widely used dispersion control additives.

DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Water-based:

DELTA-FC 1525 is suited for use in water-based primer surfacers.

DELTA-SC 2772 (must be neutralized before addition) is recommended for water-based primer surfacers. Also the short chain polysiloxane-based DELTA-SC 2580 is commonly used.

DELTA-DC 3590 (pH-independent) is specifically recommended. It has good water-resistance properties. DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Primer surfacers

Solvent-based:

DELTA-FC 1022 is commonly used defoamers in OEM primer surfacers. Both function during processing steps and application.

DELTA-SC 2772 and DELTA-SC 2777 are recommended for primer surfacers. Both are fluorocarbon- modified polyacrylates which not only give good levelling, but also improve substrate wetting substantially.

DELTA-DC 4010 M and DELTA-DC 4065 are widely used dispersion control additives.

DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Water-based:

DELTA-FC 1525 is suited for use in water-based primer surfacers.

DELTA-SC 2772 (must be neutralized before addition) is recommended for water-based primer surfacers. Also the short chain polysiloxane-based DELTA-SC 2580 is commonly used.

DELTA-DC 3590 (pH-independent) is specifically recommended. It has good water-resistance properties. DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Primer surfacers

Solvent-based:

DELTA-FC 1022 is commonly used defoamers in OEM primer surfacers. Both function during processing steps and application.

DELTA-SC 2772 and DELTA-SC 2777 are recommended for primer surfacers. Both are fluorocarbon- modified polyacrylates which not only give good levelling, but also improve substrate wetting substantially.

DELTA-DC 4010 M and DELTA-DC 4065 are widely used dispersion control additives.

DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.

Water-based:

DELTA-FC 1525 is suited for use in water-based primer surfacers.

DELTA-SC 2772 (must be neutralized before addition) is recommended for water-based primer surfacers. Also the short chain polysiloxane-based DELTA-SC 2580 is commonly used.

DELTA-DC 3590 (pH-independent) is specifically recommended. It has good water-resistance properties. DELTA-DC 4001 and DELTA-DC 4071 are very cost-effective alternatives.